7.5

l Port: The default port number is 5662. The port number may be modified under the specification of the net-
work administrator. PlanetPress Design must connect to the specified TCP port and send a document con-
forming to the following port specifications.
l Password: Enter the password for the workstation.
l Document name: Enter the file name for the converted document. This must be a file name, not a path. The
name must be no longer than 10 characters.
l Send Group:Defines what to send to the target host
l Trigger:Sends the trigger definition to be used when printing.
l Printer storage: Select the location where to send the file. In the case of CodeHost BrightQ,
this is the only option enabled in the Send group, and both the trigger and document are sent
together.
l Document:Only sends the document to the host.
l Force PostScript mode: Select this option when the destination printer is used for printing jobs
in other formats such as PJL, and when PlanetPress is not sending the output to the printer’s hard
disk. When this option is selected, PlanetPress Design inserts the following command statement
[Esc]%-12345X@PJL ENTER LANGUAGE = POSTSCRIPT to precede the document as well
as any other command statement.
4. Save Host File button: When clicked, saves the document as a postscript file in a specified folder.
5. Send to Host button: When clicked, sends the document from PlanetPress Design to BrightQ.
6. Sent to Printer button: When clicked, opens the Send to Printer dialog (see above in this topic).
If you want a printer based document sent through Codehost BrightQ, first send the document to the printer, and then
send the document to Codehost BrightQ.
Perform a Batch Conversion and/or Installation
You can have PlanetPress Design perform one or more of the following in a single operation:
l Install each document on one or more printers.
l Install each document in one or more installations of a PlanetPress Suite Workflow Tool.
l Install each document in a PlanetPress Design iWatch installation.
l Convert each document and save it to a file, along with the PostScript code for installing the document on the printer.
l Save the PTZ (or PTK) version of each document to a file.
To start a batch conversion and/or installation, from the PlanetPress Design Button, choose Batch Send To.
To use the Batch Send To wizard
l In the Introduction screen, simply click Next >>.
l In Select Documents, select the documents you want to convert and/or install. To add a document, simply browse
to its location on the left and drag it to the right part of the screen. Click Next >>.
All of the subsequent conversion and/or installation operations you define in the wizard are performed on all of the doc-
uments you select here.
l If you want to install the documents on one or more printers, place a checkmark next to each printer you want to send
to in the Select printers screen. Refer to Install a Document for the Send to Printer settings. Click Next >>.
l In PlanetPress Suite Workflow, select any PlanetPress Workflow workstation where you want to send the doc-
ument(s). Refer to Install a Document for the Send to PlanetPress Workflow settings. Click Next >>.
l In PlanetPress iWatch, enter the host of any iSeries printer where you want to send the document(s). Refer to Install a
Document for the Send to PlanetPress iWatch settings. Click Next >>.
Document Output and Preview
©2010 Objectif Lune Inc - 671 -