2022.1

l Formatselection: Select the format of the time stamp to add to files in the Hot
Folder.
l Session Retries: The number of times Print Manager will try to reconnect to the printer
before it stops trying and instead produce a timeout error in the messages.
l Printer Timeout (sec): The startup time (in seconds) allowed to the printer before a
timeout error is reported in the messages.
l Printer Ack Timeout (sec): The time (in seconds) that the Print Manager waits for a
response (an Acknowledgement) from the printer after sending a response request.
l Retry Delay: The time (in seconds) that the Print Manager waits before retrying a job after
a timeout.
l Last print job idle delay: The time the Print Manager will sit idle after a job, waiting for
another job to arrive.
To avoid having to wait after the last job, you could right-click the printer in the Printer
Queue and select "Stack Received Pages" to push out the last page committed into the
printer stacker. (See: "Printer Queue Options" on page1028)
l IPDSStreamed Reader checkbox: Select this option if difficulties are experienced with
IPDSprinters periodically freezing whilst Print Manager reads responses from the
printer.
l Log Level: Use the drop-down to select which Print Manager logging level to use.
Note
This logging relates to Print Manager job processing, and not to internal Print
Manger debugging. Settings for the internal logs are catered for in the generic "Log
Settings" on page1046 pages.
The selection of logging chosen here will determine what is displayed in the Print Wizard
Message Pane.
Higher logging levels such as "Debug" and "Status" provide more details but will have an
impact in terms of processing time and resources required.
You might need to adjust this setting based upon your production facilities, production
speeds and logging requirements. Some sites might decide that "Error" logging levels
(which only records Errors, and thus should be the minimal logging option) are all they
need.
Page 1044