Getting Started Guide
Table Of Contents
- Product Overview
- 2. Camera Indicator
- 3. Lens
- 4. Cooling Intake
- 5. Magnetic Charging Port
- 6. Power/Status Button
- 7. USB-C Data Port
- 8. Cooling Outlet
- 9. Microphone Jack
- 10. Micro SD Slot
- 11. M3 Nut Connection
- 12. Electrical Contact Interface
- Indicator Statuses
- Battery Indicator
- Camera Indicator
- The camera indicator has five statuses: Red indica
- Camera Indicator Status
- Description
- All 3 bars continuously flashing red indicates a w
- 3 bars on steady red indicate an exception alarm,
- All 3 bars continuously flashing yellow indicates
- All 3 bars on steady yellow indicates a notificati
- The middle bar on steady yellow indicates a notifi
- The middle bar on steady green indicates there is
- All 3 bars on steady green indicates there is a ta
- 1 green flash of all 3 bars indicates a photo was
- All 3 bars continuously flashing green indicates t
- 3 green flashes of all 3 bars indicates shooting u
- Blue flashes of 1, 1&2, and then 1&2&3 bars and th
- Continuous flashes of alternating green and yellow
- Obsbot Studio App
- How to Use Tail Auto-Director AI Camera
- Charging Instructions
- Startup & Shutdown
- Connecting to the App
- Gesture Control
- Target Selection
- Tail Auto-Director AI Camera allows you to select
- Gestures: After turning on the camera normally, m
- App Selection: On the app's shooting interface, ta
- •Quick Mode: Tap the "Quick" button to have the cam
- •Multi-Persor Mode: Tap the "Multi-Person" button t
- •Owner Mode: Tap the "Owner" button to have the cam
- Shooting Modes
- Specifications and Parameters
- Warning words
4
Remo All Rights Reserved
Indicator Statuses
Battery Indicator
Camera Indicator
The camera indicator has five statuses: Red indicates warning, yellow indicates notification,
green indicates normal standby or shooting, blue indicates gesture interaction or device
system initialisation, and alternating green and yellow indicates calibration or upgrade.
Camera Indicator Status
Description
All 3 bars continuously flashing red indicates a warning, such
as SD card exception
3 bars on steady red indicate an exception alarm, such as
device fault and upgrade failed
All 3 bars continuously flashing yellow indicates a
notification, such as time-lapse function execution
All 3 bars on steady yellow indicates a notification, such as
lens still locked
The middle bar on steady yellow indicates a notification,
such as target lost
The middle bar on steady green indicates there is no target
and the camera is in standby status
All 3 bars on steady green indicates there is a target and the
camera is in standby status
1 green flash of all 3 bars indicates a photo was taken
All 3 bars continuously flashing green indicates there is a
target and the camera is in normal shooting status