Quick Guide

2
3. Install the supplied waterproof components to the network cable in sequence.
CAUTION!
You need to mount the rubber ring onto the network cable interface first.
4. If your camera has a DC cable and you will not use it, insert the plug into the
interface.
5. (Optional) After the waterproof treatment is completed, put the cables into a
waterproof junction box (purchased separately).
CAUTION!
⚫ The cable connector must not be exposed and must be kept away from water.
⚫ Restore and fasten the device after dismounting.
⚫ Place the power adapter in a power distribution box.
DC interface
Plug