Quick Guide

3
1 Packing List
Contact your local dealer if the package is damaged or incomplete. The attachments
may vary with models, please see the actual model for details.
Item
Quantity
Camera
1
User document
1
Accessory pack
1
2 Safety and Compliance Information
2.1 Installation
⚫ Make sure the camera operates in an environment where the temperature and
humidity meet requirements. Keep the camera from excessive pressure,
vibration, moisture, dust, and intensive electromagnetic radiation.
⚫ Use a power adapter or a PoE device that meets requirements. Otherwise, the
device may be damaged.
⚫ Make sure the length of the power cable between the power adapter and the
camera is not too long, otherwise the voltage of the camera is lowered, causing
the camera to work abnormally. If it is required to lengthen the power cable,
lengthen the cable between the power adapter and the mains.
⚫ Do not hold the tail cable by hand for weight bearing. Otherwise, the cable
connector of the camera could be loosened.
⚫ When connecting to an external interface, use an existing connection terminal,
and ensure that the cable terminal (latch or clamp) is in good condition and
properly fastened. Ensure that the cable is not tense during mounting, with a
proper margin reserved to avoid poor port contact or loosening caused by shock
or shake.
⚫ During the process of transportation, special attention is required for the
protection of the glass window to prevent friction, scratch and contamination,
etc. In order to keep the cover clean, do not remove the protective film on the
cover during mounting. After mounting is finished, remove the film before the
device is powered on.