Quick Guide

6
4.2 Wall Mount
You can adopt wall mount or ceiling mount and purchase hardware accessories by
yourself. The following part takes wall mount as an example. Ceiling mount is similar
to wall mount and therefore is omitted here.
1. Locate the positions of the holes.
(1) Paste the drill template on the wall and align the cross center to the hole in
the wall.
(2) Lead the cables across the hole on the wall.
2. Drill holes on the wall.
(1) Use a Ø 6-6.5mm drill bit.
(2) Drill 30 mm-depth guide holes according to the positions marked by
stickers.
Micro SD slot
1
2
Lead the cables across the hole
on the wall.
Paste the installation positioning
sticker on the wall and align the
cross center to the hole on the wall.