Quick Guide

3-Axis:

For 3-Axis, after adjusting the lens horizontally and vertically (see step 5), you can

also rotate the lens clockwise or counterclockwise to get the desired monitoring

direction. Please stop rotating the camera when the lens is blocked, otherwise the

camera lens might be damaged.

7. Mount the transparent dome housing.

(1) Align the screw holes in the base, and tighten the two cross-recessed pan-

head screws on the edge of the transparent dome housing to fix it, as shown

by  in the following figure.

(2) Align the grooves (non-tail cable grooves) of the transparent dome housing

to the buckle of the base, and push up the dome housing to fix it, as shown

by  in the following figure.

Buckle on the base