Operation Manual

Page 5-40
5-5 Importing Data
13. Click on the All dials will be overwritten. button. The Overwrite the One-Touch Dial dialogue box or the Overwrite
the Abbreviated Dial dialogue box will appear.
14. Select the dial number at which you want to start writing data to the fax machine and then click on the OK button. The
operation to write data will start from the selected number downward.
NOTE
It is only possible to register information for up to 600 dial numbers. Any data over and above that will NOT be registered.
15. Make sure that the registered information is correct and then click on the OK button. The imported dialing information
will be registered.
16. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under “5-1 Registering Self-Station Information” on
page 5-2 to transmit the edited data to the fax machine.