Operation Manual

Page 5-21
5-3 Registering Dialing Information
8. Make sure that the registered information is correct and then click on the OK button.
9. Transmit the edited data to the fax machine. Refer to steps 9 and 10 under “5-1 Registering Self-Station Information” on
page 5-2 to transmit the edited data to the fax machine.
1
2
Adding a chain dial number
1 Click on the Chain tab above the list at left and select the chain dial information that you want to use.
2 Click on the Add>> button. The selected information will be added to the list at right.
3 Register the destination that you want to add to the program. Perform either steps 1 and 2 of “Add a destination that is
registered under one-touch dialing to the program” or steps 1 to 4 of “Enter a destination fax number to be added to the
program” above.
4 The added destination will be registered in the list at right under the number that corresponds to the designated chain
dial information.