Operation Manual

Copying Functions
ADVANCED OPERATION GUIDE 1-15
3
To staple, select the
staple position, [1
staple] or [2 staples],
under Staple.
To punch, select the
punch position, [2
holes] or [3 holes] ([4
holes]), under
Punch.
4
Press [Original Orientation] to choose orientation of the originals, either
[Top Edge Top] or [Top Edge Left]. Then press [OK].
5
Press [OK].
6
Place the originals and press the Start key.
Status 10/5/2006 10:10
Ready to copy.
Copies
Cancel OK
Staple/Punch
Press [OK] to display
Add Shortcut
Off
Top Edge Top
1 staple
Staple
Punch
Off
Original
Orientation
Upper
Left
Upper
Right
1
2 staples
the image.
Status 10/5/2006 10:10
Ready to copy.
Copies
Cancel OK
Staple/Punch
Press [OK] to display
Add Shortcut
Off
Top Edge Top
Left
2 holes
Staple
Punch
Off
Original
Orientation
3 holes
Right
1
Top
the image.