Operation Manual

1-1

1 Installing the Corresponding Software

Installing the Network FAX Driver

Turn on the power to the fax machine.

NOTE: If the fax machine setup has not been completed, first set up the

fax machine (connect cables, set up network, etc.). The fax machine must

be recognized when installing the driver. For information regarding fax

machine setup, refer to the Operation Guide for the machine.

Insert the provided Product Library CD-ROM into the CD-ROM drive of the

computer in which to install the Network FAX Driver. License Agreement

screen will be displayed. To accept the agreement conditions, click on the

`` button. The set-up screen will then be displayed.

NOTE: If the set-up screen does not appear after the CD-ROM is loaded,

double click on the CD-ROM drive icon to open the drive directory and

then double click on setup.exe.

Click on Custom Mode Installation.