Manualshelf

Operation Manual

ManualsBrandsOce ManualsPrinter Scanner CopierOP25 Operation Guide Scan System Functions
61626364656667686970
Page 2-13
2-6 System Setting
• Subnet Mask
Register the subnet mask of the Scanner Interface Card in this field in the following form:
XXX.XXX.XXX.XXX
• Default Gateway
Register the default gateway of the Scanner Interface Card in this field in the following form:
XXX.XXX.XXX.XXX
• DHCP/BOOTP
The DHCP and BOOTP can be set to either “ENABLE” or “DISABLE”. The factory default setting is
“ENABLE”.
• RARP
The RARP can be set to either “ENABLE” or “DISABLE”. The factory default setting is “ENABLE”.
• ARP/PING
The ARP/PING can be set to either “ENABLE” or “DISABLE”. The factory default setting is “ENABLE”.
• DNS Server (Pri.)
When a Host Name is used for transmitting data under an environment that uses a DNS server, register
the IP address of the primary DNS server in this field in the following form: XXX.XXX.XXX.XXX
• DNS Server (Sec.)
Register the IP address of the secondary DNS server in this field in the following form:
XXX.XXX.XXX.XXX
• DNS Domain Name
Register the domain name (up to 32 characters) in this field.