Operation Manual

1-8

1. Procedure for Installing and Printing with a Printer Driver

● Making the printer driver settings in Windows

Click on [Start] on the Task Bar.

The Start menu will appear.

Use the mouse to point to [Settings] and click on [Printers] in the corresponding

submenu.

The [Printers] folder will open.

Use the right mouse button to click on the icon for this printer. A pop-up menu will

be displayed.

Select [Properties] from that menu.

The Properties window will appear.

Click on the [Device Options] Tab.

Perform the following settings in order to staple your printed sets.

“Installable Options” setting

1 Put a check mark in the checkbox for the Finisher or Booklet Stitcher you are

using.

2 Put a check mark in the [RAM Disk] checkbox and set the memory size of the

RAM disk. (This setting must coincide with the setting in the printer.)

* If the optional hard disk is installed, put a check mark in the [Hard Disk]

checkbox.

Once you have completed these settings, click on [OK].

1-6 Printing

The following is an example procedure for printing using a printer driver under the conditions and environment noted below.

• OS: Windows 98

• Printer driver: KX Driver

• Application: Wordpad

• Printing conditions: Print and staple

If you use a system or driver other than that noted above, use the following procedure simply as a reference tool. It is additionally recom-

mended that you read the section corresponding to your operation system as it will contain further explanations specifically regard that OS

and other related drivers.