Operation Manual

Page 3-135
3-7 DB Assistant
6. Select the desired settings in the Default Setting window and click on OK in order to save those
settings and return to the setup dialogue box.
* For more detailed information on the various basic settings, refer to “1-3 Using the Scanner Function”
on page 1-8.
* It is possible to use the operation panel of the scanner later on in order to change the settings made
here.
* If you right-click on the Default Setting file in the setup dialogue box, a menu with the Set,
Register -> Default, and Return to default commands will be displayed.
Set...............................Displays the Default Setting
window.
Register -> Default ....Saves the currently selected
settings as the default
settings.
Return to default .......Returns to the previous
default settings.