Operation Manual

Page 1-29
1-3 Using the Scanner Function
3 . To move the “File name Input” key from the “Edit” Tab to the “Basic” Tab, select “On”. To keep the “File
name Input” key in the “Edit” Tab, select “Off”. Touch the “Close” key to register the change to that
setting.
* The factory default setting for inch specification scanners is “Off” while for metric specification
scanners it is “On”.
<Using the scanner with the “Priority "Input file name"” setting turned ON>
1 . Access the Scan to PC or Send E-mail screen, as appropriate, (“Ready to scan.” is displayed). The
following explains a scanning procedure using the Send to PC function.
Refer to “(3) Scanning under the Scan to PC and Send E-mail functions” on page 3-1 of the Set-Up
Edition of your Operation Guide for the procedure on accessing the Scan to PC and Send E-mail
screens.