Operation Manual

Page 2-8
2-5 The Home Page
2-5-1 The Top Frame
The top frame shows the IP address of the Scanner Interface Card and the status of the scanner.
<IP Address>
• Displays the IP address that is registered for the Scanner Interface Card.
<Scanner Status>
• If the scanner is in a “Ready” state, “O OK” will be displayed under Scanner Status.
• If the scanner is not “Ready”, “O OTHER” will be displayed.
* To check the status of the scanner when “O OTHER” is displayed, look under Scanner Status
Information.
* The scanner status will be checked and updated every minute.