Operation Manual

Page 2-20
2-6 System Setting
• E-mail address
The email address of the user can be up to 64 single-byte characters in length.
• Address of PC with “Address Book” installed
Type the host name or IP address of the computer that contains this user’s personal Address Book into
this field.
• Save number
Type the “save number” that corresponds to the destination computer that will be used under the Scan to
PC function into this field.
* It is possible to designate a “save number” between 001 and 100.
• Signature
Type the data (personal information) that will be transmitted with the email message into this field.
• Change password
If you want to change the administration password, select “Yes”. If you do NOT want to change it, select
“No”.
• Old password
If a password is currently registered, type that password into this filed.
• New Password
If you want to change the administration password, type a new password into this field (up to 8
characters).
* The password that you register here is NOT related to the 4-number password that is required in order to
access the Network screen in the scanner itself.
• Confirm new password
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.