Owner's manual

Step Two: Install the exhaust hose assembly to the unit
Step Three: Preparing the adjustable window slider
Align the unit adaptor of the exhaust hose assembly to the groove of the
air outlet opening on the back of the unit. Slide the exhaust hose
assembly along the direction indicated by the arrow for installation.
1. Depending on the size of your window, adjust the size of the window
slider.
2. If the length of the window requires two window sliders, use the bolt to
fasten the window sliders once they are adjusted to the proper length.
Press the exhaust hose into the window slider adaptor and the unit
adaptor. Each adaptor will snap into the exhaust hose automatically with
plastic clips.
Step One: Preparing the exhaust hose assembly.
- Medium Phillips screwdriver;
- Tape measure or ruler;
- Knife or scissors;
- Saw (optional, to shorten window adaptor for narrow windows)
Your Window Installation Kit fits windows 26.5 – 48
" and can be shortened
for smaller windows.
Unit adaptor Window slider
adaptor
Exhaust hose Exhaust hose assembly