User's Manual

vi) Launch the Windows Media Player, select <Stream> and choose <Automatically allow
devices to play my media> from the drop down list.
vii) You can now enjoy the music streaming from the windows media player.
Music streaming via UPnP
1. Once the UPnP server is configure to share media files with your radio, you can start music
streaming.
2. On the main menu, select <Media Centre> and choose <UPnP>
3. It may take a few seconds for the radio to complete the scan for available UPnP servers. If
no UPnP servers are found, it will show <Empty List>.
4. After a successful scan is done, select your UPnP server.
5. The radio will show the media categories available from the UPnP server, e.g. ‘Music,
Playlists’ etc.
6. Choose the media files that you wish to play.
You can set the mode of playback under <Configuration Playback setup>.
My Playlist
You can make you own playlist for the UPnP music files. Choose the song you want to add to
playlist, long pressing the Dial until the sign appears. The song will be added to “My playlist.
You can add up to 99 songs to “My Playlist.
The UPnP playlist will be erased when the radio is powered off.
Clear My Playlist
Remove all songs in “My Playlist” to allow a new playlist to be prepared.
AUX-in
You can enjoy the music from other audio devices by connecting the audio cable (with 3.5mm
pin) to the AUX IN connector at the rear side of the unit, such as mobile phone, MP3 player,
etc.
Alarm Setting
1. Choose <Alarm> from the main menu or press the <Alarm/Snooze> button on unit or press
the <Alarm> button on the remote controller.
2. Select either Alarm 1 or Alarm 2, and choose <Turn on> to activate the Alarm.
3. Follow the alarm wizard instructions to set the alarm.
The wizard will guide you through the settings below:
Time – Set the time for the alarm
Sound – You can choose wake to <Melody> or Wake to <My Favourite> as the alarm source.
Wake to Melody- The Melody tone is default by system.
Wake to My Favourite – only stations on favourite list can be used to set alarm.
12