User's Manual

Table Of Contents

Please preset your favorite station before setting the alarm.

Repeat – You can schedule the alarm as you desire – Everyday, Once or multiple days.

Alarm Volume – Adjust the volume of the alarm as you like by rotating the dial.

4. After the above settings are completed, press the left  button to exit and make sure the

Alarm is turned on. You will see the Alarm icon appeared on the display if it is activated.

Snooze

When the alarm sounds, the Snooze button will delay the alarm for 9 minutes every time the

Snooze button is pressed.

To cancel the Snooze, long pressing the Alarm/Snooze button until the display shows the

cancel dialogue box.

Sleep Timer Setting

You can set the timer to let the radio go standby after certain time elapsed in the range of 15

minutes to 180 minutes.

You can press <Sleep> button on the remote control to set the timer or press the <SLEEP>

button on the unit. You will see the icon appeared on the display if the timer is set.

Configuration

Network

There are two options under this setting: Wi-Fi Network and Wi-Fi Channels

Wi-Fi Network

 Add / Remove AP

Add AP – It will scan out a list of routers available nearby

Remove AP – If you have already added a router and want to remove it, choose this

option.

 AP: [ ]

If you have added more than one routers on the radio and want to switch to another one,

select this option to change.

 Signal

This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the

radio.

Usually signal levels lower than -70dBm is at weaker level and if it affects the reception

of your radio, you may need to optimize the router location or check any problem of the

router itself.

Alarm Sleep Timer

1. fm Bay Smooth Jazz

H2 ch

< 18/11225 00:25

iRadio