User's Manual

- 14 -

10. Alarm Setting

Important!

In order to use the Alarm clock function, please have the radio connected with

a power supply so to have the Standby mode enabled. When the radio is

turned on, press and release the [ ] button to put the radio into standby.

Standby is disabled when the radio is using internal battery.

• Choose Alarm from the main menu or press the [Alarm] button on the remote

control.

• Select either Alarm 1 or Alarm 2, choose Turn on to activate the Alarm.

• Follow the alarm wizard instructions to set the alarm.

• The wizard will guide you through the settings below:

Time - Set t

he time for the alarm

Sound - You can choose Wake to Tone, My Favourite as the alar

m source.

Repeat - You can schedule the alarm as you desire -Everyday, Once or multiple

days.

Alarm Volume - Adjust the volume of the alarm as you like by rotating the

[Dial/Select] knob or [Ÿ/ź] button on remote.

Alarm duration - Set the duration of the alarm from the preset options ranging

from 30 to 180 minutes. The radio will be turned to standby

when the selected duration of time is due.

• After the above settings are completed, press the [Ż] button to exit and make sure

the Alarm is turned on. You will see the Alarm icon app

eared on the display if it is

activated.

Stopping the Alarm/Activate the Snooze function

When the alarm goes off, press the [ ] to stop the alarm or press the

[Dial/Select] knob to activate the Snooze feature.

When the Snooze is activated, the alarm is muted for 9 minutes and sounds again

when the time is due. You can repeat the process multiple times.

To stop the "Snooze" function, press the [ ].

Snooze

9:00

Press POWER to stop