User's Manual

- 17 -

12. Con¿guration

4. Enter the password of your network.

5. Tap “Multicast” followed by “Confirm” to complete.

6. The radio will start associating with the network and followed with the message

“Association complete” if network is successfully connected.

Remove AP - If you have already added a router and want to remove it, choose

this option.

Note - Always bring the radio within 2 meters of the Wi-Fi router for setup.

• AP : [ ]

If you have added more than one routers on the radio and want to switch to another one,

select this option to change.

• Signal

This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the radio.

Usually signal levels lower than -70dBm is at weaker level and if it affects the reception of

your radio, you may need to optimize the router location or check any problem of the

router itself.

• IP

The IP is set Dynamic by default. Select to change Fixed IP according to your network

condition.

• DNS

The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your

network condition.