User's Manual

SETTING UP

Those steps for connecting your radio to your network

Step 1 Switching on the radio

Plug the cable from the AC adapter into the socket labeled DC on the back of the radio, then power on

the radio.

Caution: Use only the mains adapter supplied with the radio. Connecting a power supply with a different

rating will cause permanent damage to the radio and may be hazardous.

The display on the front of the radio will light up and say:

Then show

After a few seconds, it will show:

If it complete the initialing, it will auto scan the ESSID as

Then it will list all the ESSID names it can find, you can select one of you want to use, maybe it will request

you input the correct WEP(Wired Equivalent Privacy) or WPA(Wi-Fi Protected Access) code. If your

network is not configured to need a WEP or a WPA code, the unit will connect to the ESSID auto and

success as

Or if you are requested to input the encryption, you can do as below

1. Select the one you want to use

…….

Network OK

CC WiFi 2

Connecting

to Network

>>>>>>>>>>

Scanning for

Wireless

…….