User guide

2: D-2000 Specifications
000-10000-020-02-1209 5
Rear Panel
Component Description
Power Terminal Input
Connect power cable to provide voltage to D-2000:
Note: Only connect the power cable to the lamp when the Main Power Switch is in
the OFF position.
Main Power Switch
Turn on to supply power to the D-2000. The Power LED illuminates when this
switch is in the On position.
Fuse
Contains the fuse to protect the unit against overload:
European Fuse Type: Miniature fuse 5 x 20 mm, 1 Amp slow blow
USA Fuse Type: Miniature fuse 5 x 20 mm, 2.5 Amp slow blow
Cooling Fan Cools the interior of the D-2000. Do not obstruct.
Type Sign
Information about:
– Type – Version
– Order No. – Serial No.
– Main connection – Max. Ambient. Temperature
– Warnings – CE-Marking
15-pin Connector
Controls the lamp shutter (D-2000-S models only) via a TTL input signal. See
Pinout Information.
Main Power Switch
Power Terminal Input
Fuse
Cooling Fan
Type Sign
15-pin Connector