User's Manual

Ocean Signal SafeSea S100 User Manual
Part Number Version 0.0a 10
For the Product Safety Data Sheet and advice on battery
transportation, please see the Ocean Signal web site at
www.oceansignal.com.
Maintenance and Troubleshooting
The S100 SART should not need servicing during its lifetime, with
the exception of changing the battery before the marked expiry
date.
Regular cleaning, inspection and testing are advised.
Clean any salt or grime residue off the unit with a weak solution of
detergent in warm water. Never use solvents as this may affect the
structural integrity of the plastics used. Rinse well with fresh water
after washing.
Inspect the unit for signs of case damage or cracks, check the labels
are intact and the battery expiry is still in date. Make sure the
telescopic pole (if provided) is still present and is free to extend.
Check for correct SART operation by visually inspecting the indicator
LED on the unit. If the unit appears to fail testing, then the
following points should be checked.
• Are there any vessels in the vicinity that would have radar on
to trigger the SART?
• Is the SART being shielded from the view of other vessels?