User's Manual

Ocean Signal SafeSea S100 User Manual
Part Number Version 0.0a 3
In Case of Emergency
Remove the S100 SART from its mounting or housing
To manually activate the SART
Following activation the SART should be
tethered to the liferaft using the lanyard and
mounted on the attached telescopic pole so
that the SART at least 1metre above the
water. Alternatively the SART may be
attached to the roof or the life raft, using the
tie provide by the liferaft manufacturer.
1
2
DE
ACTIVATION
3 Slide and hold the
Green
switch to the left, then
slide the Red switch back
into the up position
and
release the Green switch.
TEST
Rotate the Grey
Switch
clockwise and ho
ld.
ACTIVATION
1 - Break the switch cover
2 -
Slide and hold the
Green
switch to the left,
then slide the Red
switch
into the down position
and
release the
Green
switch.
3
4