User's Manual

SafeSea V100 User Manual
14 Version 0A.00 21/07/2011
Make sure the charger is already powered up. The Green power LED will
now be lit up. Place the radio into the charger base and ensure it locks in
place. The Red status LED will start flashing to indicate the battery is
charging. On completion of the charge, the Red LED will stop flashing and
be permanently illuminated.
If the battery is faulty or is failing to make contact, then the Red LED will
not be illuminated. Check that the charging contacts on the battery are
clean and retry. If the Red LED still fails to light, this indicates that the
battery is faulty and needs replacing.
Note: It is not recommended to transmit with the V100 while it is in the charger.