Manualshelf

User Manual

ManualsBrandsOcean Star Electronics ManualsAudio EquipmentALEXA ENABLED Bluetooth/WiFi WIRELESS STEREO SMART SPEAKER
9101112131415161718
E14
LINE IN OPERATION
This unit provides a LINE IN jack for connecting external audio devices like MP3 players, CD
players and listen to them through the speakers of this unit.
1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the cable.
2. To select auxiliary audio input, plug one end into the Aux IN jack on the back of main unit.
3. Plug the other end of the cable into the Line-out Jack or Headphone Jack of your external
audio device.
4. Turn on the external audio device and the main unit.
5. Press and hold the MODE button to select AUX mode, Mode Indicator LED turns Green.
6. The volume level can now be controlled through the main unit. Operate all other functions
on the auxiliary device as usual.
NOTE:
If you connect this unit to the Line-Out Jack of your external device then you only need to
adjust the volume control of this unit. If you connected the Headphone Jack of your
external device then you may need to adjust both the volume control of your external
device and the volume control of this unit to find the most desirable volume setting.
In power on mode, If no sound playback or paused by user for 15 minutes, unit will turn
into standby mode automatically for power saving.
Press and hold the POWER button for 2 seconds to turning off the unit when you finish
listening. Don't forget to switch off the power of your external device as well.
POWER SAVING
To save power, the speaker will automatically turn off if no sound has played through it for 15
minutes.
RESETTING THE JSB-550
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by
disconnecting it from mains supply. Unplug the AC adaptor from main power, wait at least for
60 seconds before reconnect the AC adaptor power.
CARE AND MAINTENANCE
1. Do not subject the unit to excessive force, shock, dust or extreme temperature.
2. Do not tamper the internal components of the unit.
3. Clean your unit with a dry cloth. Solvent or detergent should never be used.
4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
5. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinet.