User Manual

BACK VIEW

<<Replace updated drawing here>>

Controls Press & hold Tap

1. DC IN Jack --- ---

2. LINE IN Jack --- ---

3. WPS Button In WiFi mode, press and hold

this button for 5 – 6 seconds

then release it, unit will reset

WiFi to factory setting then

restart for set up.

In WiFi mode, tap this button

once to link up the speaker to

your Wi-Fi network by

following the APP instruction.

GETTING STARTED

CONNECTING THE AC POWER

This unit operates using the included AC adaptor with 12V 2A (center-positive )

output, and is compatible with standard 120V~ 60Hz AC household power

Insert the the DC Plug of the AC Adaptor into the DC IN jack on the back of the unit. Plug the

AC Adaptor into a standard 120V~ 60Hz AC wall outlet.

INITIALIZATION

The unit will initialize when first plugged in. The initialization process could take up to 60

seconds to complete, so please wait for this process to finish before proceeding. The LED

will be flashing White, you will hear a voice prompt of “Ready for a set up” when the

initialization is completed. The unit is now in setup Mode.

NOTE: 1.) The initialization process may take up to 60 seconds or longer when first

connected. This process is normal and only occurs when first plugged in.

2.) If the unit has been setup to connect your Wi-Fi network successfully, the LED will be

solid White after connected. The unit is now in WiFi mode.

WPS

AUX IN