Owners Manual

FORWARD
This manual provides the user with basic details for the installation and operation of the
OceanAire 2OACH heat pump. It is recommended to read and fully understand the
instructions outlined within this manual, before operating the 2OACH unit.
As with all commercial air conditioning equipment, it is recommended to have the 2OACH
sized and installed by a licensed specifying engineer and contractor, in accordance with
all local and state codes. The length of service received can be extended by following
the installation and preventive maintenance instructions.
NOTICE
In our ongoing process of continuous improvement, the items and procedures described
in this manual are subject to change without notice. Please note model and serial
number of the 2OACH unit before contacting the factory.
TABLE OF CONTENTS
PAGE
GENERAL INFORMATION …................................ 1
PRODUCT DATA AND SPECIFICATIONS............ 2
UNIT DESCRIPTION
Standard Features.................................. 3
Applications / Operation
Cooling Mode.......................... 4
Heating Mode…………………. 5
Electrical Configurations......................... 6
Use of Extension Cords…………………. 7
Condensate............................................ 8
Accessories………................................. 9 - 15
Inspection/Installation............................. 16
Deluxe Electronic Controller.................... 17-19
SERVICE
Replacement Parts Procedure................. 20
Troubleshooting Guide............................. 21
Preventive Maintenance........................... 22
Interior View............................................. 23
DIAGRAMS/SCHEMATIC
Piping Schematic…………………………. 24
Single Phase Wiring Diagrams................. 25 - 27
Three Phase Monitor................................ 28
Three Phase Wiring Diagrams................. 29 - 32
WARRANTY…......................................................... 33
END USER INFORMATION / TECH NOTES........... Back Cover