Engineering, Installation and Service Manual

ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY (2NK)
The optional discharge nozzle kits are used to direct the condi-
tioned air to a specific target area. By concentrating the airflow,
the nozzles increase the air velocity towards production lines to
cool personnel or equipment. In server rooms, the nozzles can be
used to induce airflow through the rack to remove the hot air from
the area of the equipment.
2NK-1 for model PAC12, with (2) 4-inch diameter nozzles with
an approximate compressed length of 15 inches. The
approximate extended length is 21 inches.
2NK-2 for models PAC18, PAC24 with (2) 6-inch diameter noz-
zles with an approximate compressed length of 22 inches. The
approximate extended length is 32 inches.
2NK-3 for PAC36 and PAC60, with (2) 8-inch diameter nozzles
with an approximate compressed length of 20 inches. The
extended length is approximately 29 inches.
The nozzle kits come pre-assembles with the nozzles secured to
a mounting plate, and with edge guards. By removing the Air
Boss discharge grill, one can insert the nozzle kit into the opening
without the use of tools.
Nozzle Kits
Kit Voltage
PC-1P 115V
PC-2P 208-230V
CONDENSATE PUMP KIT: PC-1P and PC-2P
A plug-in condensate pump kit is available for applications where emptying the 5 gallon
condensate tank is not desired. The pump kit consists of a condensate pump with mount-
ing hardware and electrical connections, along with the tubing required for the drain and
discharge of the condensate water.
PARTS LIST
(1) Condensate Pump with mounting hardware
(1) 3/8-inch drain hose, 25 ft
(2) Mounting screws
(1) Drain hose — black corrugated
(2) Hose clamps
Pump Kit
Plug-in kit is for models with serial number G4 or higher (Oct. 2003).
The condensate pump provides for the
automatic removal of condensate water
during the cooling process. The pump is
capable of pumping against a 20 foot head,
allowing for the routing of the drain line
above the drop-ceiling to a nearby drain.
The pump is controlled by an internal float-
switch which turns the pump on and off
automatically. The pump is also equipped
with a condensate over-flow safety switch,
that will shut down the Air Boss compressor
when the pump is not working properly.
10