AquaCooler Accessories

NK-1 (right) 4 inch diameter flexi-
ble nozzles used on PWC10 and 12.
NK-2 (left) 6 inch diameter flexible
nozzles used on PWC18, 24, 36.
NK-3 (center) 8 inch nozzles are
used on the PWC60.
These same nozzles can be used on
the PAC AirBoss air cooled units.
No need to duplicate inventory !
HK-..... Hose kits used to sup-
ply water to and from con-
denser. The third line is for con-
densate removal. The hose kits
are available in 10ft - 25ft -
40ft lengths. A laundry tub fau-
cet adapter is included.
DA ... Duct adapter used to apply a
single discharge duct to the evapora-
tor. The PW10 and 12 transition to 6
inch round and can handle 25 equiva-
lent feet. The PWC18, 24, 36 transi-
tion to 10 inch round and can handle
50 equivalent feet. The PWC60 uses
16 inch round and can handle 100
equivalent feet of duct.
EP ... Evaporator Return Plenum attaches
in place of the standard return air grille
allowing a ducted return. Great for remote
cooling of computer and equipment
rooms. 10 inch round duct for the PWC10
and 12. 12 inch round duct for the
PWC18, 24. And, 16 inch on the PWC36
and PWC60
A side by side look comparing the duct
adapter for a single duct run, to the nozzles
with 2 discharge ducts. The grille, center, is
standard equipment.