Operation Manual

PAGE 1
FEATURES AND USE WARRANTY Refer to the Warranty Registration Card provided by your Authorized Oceanic Dealer. WARNING: Improper use of Dive Instruments may result in serious injury or death. Read and understand these instructions thoroughly ANNUAL INSPECTION before you dive with any Oceanic Analog Instrument. Once each year, return the Gauge(s) to your Authorized Oceanic Dealer for inspection.
PAGE 2
INSTRUMENT BOOT NOTE: The Installation Procedures for the Navcon and Combo style INSTALLATION/REMOVAL INSTRUCTIONS Consoles is similar. Install the Dive Computer first, then the Pressure Gauge, then the Compass (or Slate). REMOVAL OF INSTRUMENTS FROM WRIST BOOTS: INSTALLING INSTRUMENTS IN NAVCON OR COMBO BOOTS: Peel the lips of the Boot downward off the Module while applying pressure from underneath, working the Module out slowly.