Operation Manual

segments of the LCD include - FO2 set point value, 'EA' (External Access), and

'FLY' (during the first 12 hours).

A second time display, located in the center right portion of the LCD (Fig. 23b,

page 19), indicates Elapsed Dive Time, or Decompression Stop Time required

(Fig.24b) for the current stop ceiling indicated, as identified by the Elapsed Dive

Time and Ceiling Stop icons, respectively. Other displays that utilize these

segments of the LCD include - 'FO2', 'PO2', 'O2', and time to fly minutes (during

the first 12 hours).

Note that the maximum value of Elapsed Dive Time that will be displayed is

1:59 (hr:min). When Elapsed Dive Time exceeds 1 hour and 59 minutes, the

display will show 1: - - for the remainder of that dive and in the log for that dive.

Time displays are shown in hour:minute format (i.e. 1:06 represents one hour

and six minutes, not 106 minutes!). The colon that separates hours and minutes

blinks once per second when the display is indicating real time such as elapsed

Surface Time or Dive (bottom) Time. Dive Time Available, No Decompression

Dive Time Remaining, Total Ascent Time required, or Time to Fly are calculated

projections of time and use a solid (non-blinking) colon to indicate that they are

counting down, rather than counting up.

DATA

PLUS

Fig. 24 - Decompression Stop

Depth / Time