Operation Manual

The value of pressure will be displayed during all dive modes when the Display

Module is linked to the Transmitter and within the operating range. Linking

is explained in more detail in the Pre Dive and Dive Mode section.

Depth Displays

During a dive, the Current Depth display, located in the upper/right portion

of the screen (Fig. 16a), indicates depths from 0 to 330 feet (99.5 meters) in 1

foot (.5 meter) increments.

The value of current depth will be displayed during all dive modes unless you

descend deeper than 330 feet (99.5 meters), at which point the display will

show three dashes ( - - - ) to indicate that you have gone 'out of range'. This is

described in detail in the Handling the Extremes section.

A second depth display located in the lower/right portion of the LCD (Fig. 16b)

indicates the Maximum Depth reached during that dive. If the Alternate

Mode is turned 'off', the display will appear when the Select/Right button is

pressed. More critical information such as a message will override it.

In the event that you descend deeper than 330 feet (99.5 meters), this display

will only show three dashes ( - - - ) as the maximum depth for the remainder of

that dive, and as the Max Depth in the Dive Log for that dive. This is de-

scribed in detail in the Handling the Extremes section.

Fig. 16 - Depth Displays

(Alternate Dive Mode)

DECO

C.Z. C.Z.

PSI

NO DECO