Operation Manual

17
DataTrans Plus
®
DECO
C.Z. C.Z.
PSI
FT
O
2
NO DECO
0
5
10
20
30
40
50
60
®
DECO
C.Z. C.Z.
PSI
FT
O
2
NO DECO
0
5
10
20
30
40
50
60
During a Decompression Dive the required Ceiling Stop Depth appears in
the lower/left portion of the screen (Fig. 17a). The display toggles with the
message CEILING once every 15 seconds while in the Decompression Mode.
This is described in detail in the Handling the Extremes section.
Time Displays
The Main Time display, located in the center of the screen (Fig. 18a), has
larger digits than the other numerial displays. Depending on the operating
mode that the DataTrans Plus is in at the time, the display indicates elapsed
Surface Time, theoretical Dive Time Available, Dive Time Remaining, or Total
Ascent Time required.
A second Time display appears in the lower portion of the screen. Depending
on the operating mode that the DataTrans Plus is in at the time, the display
indicates Elapsed Dive Time (Fig. 18b), Decompression Stop Time required,
Time of Day, or Time to Fly.
Each display is described in detail in subsequent sections of this owner's guide.
Most of the time displays are shown in hour:minute format (i.e. 1:02 repre-
sents one hour and two minutes, not 102 minutes!). The colon that separates
hours and minutes blinks once per second when the display is indicating real
time such as elapsed Surface Time. Dive Time Available, No Decompression
Fig. 17 - Depth Displays
(Decompression Dive Mode)
Fig. 18 - Time Displays
(Alternate Dive Mode)
b
b
a
R2