Operation Manual

33
DataTrans Plus
ENTERING SETTINGS
Before going diving, enter the general settings to be used for each of your
dives. These include - Time, Date, Alternate Display, Units of Measure, Depth
Alarm, Gas (tank pressure) Alarm, Link code, and Language.
Note that FO2 is a 'pre dive' setting that must be entered prior to each nitrox
dive. Setting the FO2 value for the nitrox mixture being used is described in
the Pre Dive and Dive Mode section.
Set Time
Your DataTrans Plus has been factory set for 12:00 AM. To change to the cur-
rent Time, follow this procedure, beginning in Surface Mode:
1. Press the Advance/Left button 5 times to advance to the Set Mode.
MODE:SET will appear, with SET flashing (Fig. 31). If you accidentally
pass the Set Mode, you will need to press the Advance/Left button repeat-
edly until MODE:SET reappears.
2. Press the Select/Right button to select (enter) the Set Mode. SET:TIME
will appear, with TIME flashing (Fig. 32).
3. Press the Select/Right button once to select (enter) the Time setting.
Time of day will appear, with the first digit flashing (Fig. 33).
4. To set the time, press the Advance/Left button to change that digit until
®
0
5
10
20
30
40
50
60
Fig. 31 - Set Mode
®
0
5
10
20
30
40
50
60
Fig. 32 - Set Time
®
0
5
10
20
30
40
50
60
Fig. 33 - Time of Day