Operation Manual

DataTrans Plus

After the year has been set, SET: ALT will appear, with ALT flashing. To set

the Alternate display continue with step 4 of the following Set Alternate Dis-

play procedure, or to return to the Surface Mode press the Advance/Left but-

ton 5 times.

Set Alternate Display

Your unit has been factory set so the values of Temperature, Elapsed Dive

Time, and Maximum Depth will be displayed continuously during the Dive

Mode. You can turn this Alternate display 'off' and have them appear only

when you wish to see them by depressing the Select/Right button during the

dive. To turn the Alternate Display 'off', follow this procedure, beginning with

step 1 if in the Surface Mode, or beginning with step 4 if you just set the Date:

1. Press the Advance/Left button 5 times to advance to the Set Mode.

2. Press the Select/Right button to select the Set Mode.

3. Press the Advance/Left button 3 times to advance to the Alternate set-

ting. SET: ALT will appear with ALT flashing (Fig. 36).

4. Press the Select/Right button to select the Alternate Display setting.

ALT: ON will appear with ON flashing (Fig. 37).

5. Press the Advance/Left button to toggle between ON and Off, and press

the Select/Right button to select the one displayed.

After the Alternate display has been set, SET:UNITS will appear with UNITS

flashing. To set the Units of Measure continue with step 4 of the following Set

Fig. 37 - Alt On/Off

Fig. 36 - Set Alt