Operation Manual

DataTrans Plus

Set Language

The Message Box displays warning messages in the language that you choose -

either English, Italian, German, Spanish, or French. The Mode Menu sys-

tem is also displayed in the language selected, so it is very important

that you do not accidentally change this setting to a language that

you do not understand.

Your unit has been factory set for English. To change the language, follow

this procedure beginning with step 1 if in the Surface Mode, or beginning with

step 4 if you just set the Link code:

1. Press the Advance/Left button 4 more times to advance to the Set Mode.

2. Press the Select/Right button to select the Set Mode.

3. Press the Advance/Left button 7 times to advance to the Language set-

ting. SET:LANG will appear, with LANG flashing (Fig. 49).

4. Press the Select/Right button to select the Language setting. The default

setting ENGLISH will appear, flashing (Fig. 50).

5. Press the Advance/Left button to scroll through the Language setting op-

tions until you arrive at the one you prefer.

6. Be careful to ensure that the language selection flashing is the one that

you prefer before you press the Select/Right button.

7. Press the Select/Right button to save the Language chosen and return to

the Surface Mode.

Fig. 50 - Language

Fig. 49 - Set Language