Operation Manual

DECO

C.Z. C.Z.

PSI

NO DECO

After Total Ascent Time reaches zero and the Tissue Loading Bar Graph re-

cedes into the yellow caution (C.Z.) zone, you can surface. However, to add

a greater margin of protection, Oceanic strongly recommends that

you wait until the segments of the Tissue Loading Bar Graph are well

within the 'green' no decompression (NO DECO) zone, unless a low

tank pressure condition requires you to surface.

3. You descend deeper than 330 feet (99.5 meters).

NOTE: Oceanic reminds you that the DataTrans Plus is in-

tended for no decompression diving at depths within 130 feet

(39 meters). Expanded capabilities of the DataTrans Plus are

provided as safety features to assist you with emergency situa-

tions.

Upon descending deeper than 330 feet (99.5 meters), the Tissue Loading Bar

Graph will flash and the Current Depth and Maximum Depth displays will

only indicate 3 dashes (Fig. 96) until ascent is made to a depth shallower than

330 feet (99.5 meters), at which time the Current Depth display will be re-

stored. Max Depth will continue to display 3 dashes. Exceeding the maximum

operating depth is described in detail on page 85 of this section.

Five minutes after reaching the surface from a dive in which a De-

layed Violation occurred, the DataTrans Plus will enter an Immedi-

ate Violation Mode and revert to Gauge Mode for 24 hours.

Fig. 96 - Delayed Violation

(>330 ft / 99.5 m)