OCEANIC ® O2 TECH REG O24/Alpha 7 Regulator owner's guide
O2 Tech Reg Pay special attention to items marked with this Warning Symbol. WARNINGS: • This Regulator is intended for use by recreational specialty divers who have successfully completed a nationally recognized specialty training course in scuba diving using breathing gases containing high levels of oxygen by volume. It must not be used by untrained persons who may not have knowledge of the potential risks and hazards of scuba diving using breathing gases containing high levels of oxygen.
Owner's Guide CONTENTS WARNINGS ............................................................................. 2 NOTICES AND WARRANTY ....................................................... 2 INTRODUCTION ....................................................................... 4 O24 FIRST STAGE ..................................................................... 5 ATTACHMENT OF HOSES ................................................................ 5 REMOVAL OF HOSES .........................................
O2 Tech Reg INTRODUCTION THANK YOU for choosing an Oceanic O2 Tech Reg (O24/Alpha 7)! Features and operation are described in this owner's guide, and/or any addendum or supplement provided with it. By following the instructions in this guide, you will understand how your regulator works, how to make best use of its features, and how to maintain it. DO NOT dive with the O2 Tech Reg until you have read and understand all information provided with it.
Owner's Guide O24 FIRST STAGE WARNING: Failure to prepare your First Stage properly for use in harsh environmental conditions, such as being subjected to sediment or the possible buildup of ice, or salt crystals, may result in serious injury or death. Operation of your First Stage is not visible when using a regulator system.
O2 Tech Reg REMOVAL OF HOSES WARNING: At least one Second Stage must be connected to the First Stage to facilitate purging of breathing gas from the First Stage. To remove a Hose from the First Stage • Ensure that the Regulator System is purged of all breathing gas. • Loosen and remove the Hose by turning it in the counter clockwise direction with an open end wrench of the appropriate size.
Owner's Guide ALPHA 7 SECOND STAGE WARNING: Even if your First Stage is properly prepared for use in harsh environmental conditions, only proper training will protect your Second Stage from the effects of the environment. FEATURES AND OPERATION The Second Stage of the regulator assembly receives breathing gas at an intermediate pressure of approximately 140 psi from the First Stage and delivers it to you at ambient pressure during inhalation.
O2 Tech Reg CARE AND MAINTENANCE TRANSPORT and STORAGE If possible, transport your Regulator Assembly (preferably dry) in a padded carrying case or equipment bag separated from sharp items (i.e., dive knife, spear gun, etc.) that might damage or scratch the components. You should also protect the Second Stages from damage from heavy objects (i.e., dive light, first stage, etc.). Prior to storing your Regulator: • Ensure that the complete Regulator is clean and dry.
Owner's Guide In the event that any component of your Regulator Assembly requires any form of repair or service, return it to your local Authorized Oceanic Dealer for professional service by a trained technician authorized to perform Oceanic factory prescribed service. Once each year your complete Regulator Assembly should be inspected and serviced by an Authorized Oceanic Dealer.
O2 Tech Reg ADDITIONAL SPECIFICATIONS FOR CONNECTING COMPONENTS TO OCEANIC REGULATOR FIRST STAGES Second Stage (Primary or Octopus): • Nominal Source Pressure = 140 psi (9.5 BAR) ± 5 psi (.5 BAR) • Maximum Source Pressure = 155 psi (11 BAR) • Thread Size = 3/8 - 24 UNF • Inhalation Effort = 1.1 to 1.3 ciw* (cubic inches of water) * Delta 3 model = adjustable from 0.0 to 2.5 ciw • Exhalation Effort = 1.
Owner's Guide RECORDS O24 Serial # ________________________________ Alpha 7 Serial # ________________________________ Octopus Model ________________________________ Octopus Serial# ________________________________ Date of Purchase ________________________________ Oceanic Dealer ________________________________ Dealer Phone No.
O2 Tech Reg Oceanic Germany - Nurnberg, Germany Tel: 49-911-324-6630 Fax: 49-911-312-999 E-mail: office@oceanic.de Oceanic South Europe - Genova, Italy Tel: 0039-010-834-51 Fax: 0039-010-834-52-50 E-mail: Shawne.Stanley@oceanicse.it Oceanic SW, Ltd - Devon, United Kingdom Tel: 44-1-404-89-1819 Fax: 44-1-404-89-1909 E-mail: info@oceanicuk.com Oceanic France - Marseille, France Tel: 33-491-25-27-45 Fax: 33-491-25-35-86 E-mail: oceanicfrance@wanadoo.
