Operation Manual

12
OCi OPERATING MANUAL
© 2002 Design, 2013 Doc. No. 12-5335-r02 (9/12/13)
WATCH DEFAULT TIME
Default Time is the Time that is displayed on the Watch until changed. It is also the Time viewed during operation in DC (Dive
Computer) Modes.
Main Time is the current Time at your home location and is normally selected as the Watch Default Time.
Alternate Time will be the current time at a remote travel location. Upon arrival at the location, Alternate Time can be inter-
changed with Main Time to make it the Watch Default Time. When it is not selected to be the Default Time, it can be viewed on
the Watch ALT 1 screen, or it can be displayed on the Watch screen with Main Time and will be labeled as Dual Time
Once Alternate Time is set, by hour differential, it will automatically change when Time of Day is set/changed. When Alternate
Time is selected to be the Watch Default Time (while at a travel location), it will change directly when Time of Day is changed
and Main (home) Time will then change by a differential opposite the one set for Alternate Time.
WATCH DEFAULT TIME, information includes (Fig. 3A/B/C):
> Dual Time (hr:min) with icon, if Show Dual is set for YES.
> Time of Day (hr:min_sec), Main (home) or Alternate (away), with A or P if 12 hour format, & graphic ALT if Alternate.
> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or SUN.
> Month.Day (or Day.Month).
> TLBG, if any after NORM or FREE dives.
> Alarm (speaker) icon, if the Daily Alarm is set On.
> Battery icon, if a Low Battery condition.
• M (< 2 sec) - to access the Watch Main Menu.
• M (2 sec) - to access the DC (Dive Computer) Mode last selected.
• A (< 2 sec) - to access the Watch ALT 1 screen. Bypassed to ALT 2 if Show Dual is set for YES.
• S (< 2 sec) - to silence the Daily Alarm.
• S (2 sec) - to access Compass Mode.
• L (< 2 sec) - to toggle the Backlight On/Off.
Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
WATCH ALT 1, information includes (Fig. 4A):
> Time of Day (hr:min_sec), Alternate (away) or Main (home), with A or P if 12 hour format, & graphic ALT if Alternate.
> Day of Week graphic MON, TUE, WED, THU, FRI, SAT, or SUN.
> Month.Day (or Day.Month).
> TLBG, if any after NORM or FREE dives.
> Alarm (speaker) icon, if the Daily Alarm is set On.
> Battery icon, if a Low Battery condition.
• A (< 2 sec) - to access ALT 2.
• Reverts to the Default Time screen after 10 seconds if A is not pressed.
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
WATCH ALT 2, information includes (Fig. 4B):
> Graphic CDT (Countdown Timer) with OFF or Countdown Time (hr:min), time previously set or that remaining.
> Altitude graphic EL2 (to EL 7), blank if Sea level.
> Temperature with ° icon and graphic F (or C).
If the CDT is On and running with time remaining -
• S (< 2 sec) - to stop/start the Timer.
• A (2 sec) - to reset the Timer to the hr:min value set.
• A (< 2 sec) - to revert to the Watch Default Time screen with the CDT running in the background.
If the CDT is Off, or it was running and has counted down to 0:00, operation reverts to the Watch Default Time screen after
10 seconds or by pressing A (< 2 sec).
• L (< 2 sec) - to toggle the Backlight On/Off. Will be On for the duration time set.
• L (2 sec), while the Backlight is On, - to reset the timer to keep it On for the full duration time set.
WATCH MAIN MENU, information includes (Fig. 5A/B):
> CDT Setup >> To select Off, On, or Set (hr:min).
> Chrono >> To Start, Stop, Recall Laps, and Reset.
> Daily Alarm >> To select Off, On, or Set (hr:min).
> Time Menu >> To select/set Date Format, Hour Format, Time, Date, Alternate Time, Default Time, Show Dual.
• M or S (2 sec) - to revert to the Watch Default Time screen.
• If no button is pressed during a period of 2 minutes, operation will revert to the Watch Default Time screen.
• A (< 2 sec) - to step forward (advance down) through the selections indicated by the pointer icon ( > ) along the left side of
the matrix.
Once the pointer icon ( > ) reaches the lower selection on the matrix, it will remain in that position pointing to the next selec-
tion that appears when A is pressed. A down arrow icon located on the right side of the matrix indicates that additional
selections are available below those displayed.
Fig. 3C - DEFAULT TIME
(Alternate selected, no Dual)
Fig. 4A - WATCH ALT 1
Fig. 4B - WATCH ALT 2
Fig. 3A - DEFAULT TIME
(Main selected, no Dual)
Fig. 5A - MAIN MENU
(fi rst 3 items)
Fig. 5B - MAIN MENU
(last 3 items)
Fig. 3B - DEFAULT TIME
(Main selected, with Dual)