Operation Manual

37
• S (< 2 sec) to save the Stop Time setting and flash the Stop
Depth setting.
• A (< 2 sec) to step up through Depth Set Points of 10, 15,
and 20 FT (or 3, 4, 5, and 6 M) one at a time
• S (< 2 sec) to save the Stop Depth setting and access Set
Algorithm.
Set Algorithm, information includes (Fig. 31):
> Graphics SEt and ALGO
> Set Point graphic PZ+ (or DSAT) flashing
• A (< 2 sec) to toggle Set Points.
• S (< 2 sec) to save the setting and access Set CF.
• S (2 sec) to revert to Set SS.
This feature allows selection of the algorithm to be used for nitrogen
and oxygen calculations for Plan and DTR values.
The setting locks in for 24 hours after NORM dives.
Set Conservative Factor (CF), information includes (Fig. 32):
> Graphics SEt and CF with CF icon
> Set Point graphics ON (or OFF) flashing
• A (< 2 sec) to toggle Set Points.
• S (< 2 sec) to save the setting and access Set Glo.
• S (2 sec) to revert to Set Algorithm.
Fig. 30C - SET SS
TIME/DEPTH
Fig. 31 - SET ALGORITHM
Fig. 32 - SET CF