Operation Manual

CARE AND CLEANING

Protect your VEO from shock, excessive temperatures, exposure

to chemicals, and tampering. Protect the lens against scratches

with a Instrument Lens Protector. Small scratches will naturally

disappear underwater.

• Soak and rinse the VEO in fresh water at the end of each

day of diving, and check to ensure that the areas around

the Low Pressure (Depth) Sensor (Fig. 108a), PC Interface

Data Port (Fig. 108b), and buttons are free of debris or

obstructions.

• To dissolve salt crystals, use lukewarm water or a slightly

acidic bath (50% white vinegar/50% fresh water). After

removal from the bath, place the VEO under gently running

fresh water and towel dry before storing.

• Transport your VEO cool, dry, and protected.

INSPECTIONS AND SERVICE

Your VEO should be inspected annually by an Authorized

Oceanic Dealer who will perform a factory prescribed function

check and inspection for damage or wear. To keep the 2 year

limited warranty in effect, this inspection must be completed one

year after purchase (+/- 30 days).

Fig. 108 - CASE BACK