Operation Manual

18
VT 4.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5213-r02 (9/6/11)
SET S (Shortcut) Menu, information includes (Fig. 33):
> Graphics SEt S and MENU.
One item can be selected from the following menu list. That item (referred to as a Shortcut) can then be accessed directly by
pressing M (2 sec) while viewing the Surface Main.
Selections include:
> SET FO2.
> LOG MENU.
> MY INFO (default Shortcut until another item is selected).
> SET HEADING.
> SET TIME.
• A (< 2 sec) to step forward (down) through selections.
• M (< 2 sec) to step back (up) through selections.
• S (< 2 sec) when the pointer icon ( > ) is next a selection will save it as the Shortcut and revert to the Set Menu.
SET D (Dive Main) Menu, information includes (Fig. 34):
> Graphics SEt D and MENU.
The default screen for No Deco dives (except while at Stops) displays Current Depth, NDC time, Pressure, and ATR (air time
remaining). Items such as Max Depth and EDT (elapsed dive time) are displayed on Alternate screens. Set D allows certain items
to be added to the Main (moving them from the Alternates).
One item can be selected from the following menu list.
> USE DEFAULT >> no change to the display.
> ADD EDT >> reduces the size of NDC digits .
> ADD MAX D >> also reduces the size of NDC digits .
> ADD EDT + MAX D >> NDC, EDT, & Max D digits smaller .
> ADD O2 DATA >> reduces the size of NDC digits & PO2 replaces Pressure (which moves to an Alternate) .
• A (< 2 sec) to step forward (down) through selections.
• M (< 2 sec) to step back (up) through selections.
• S (< 2 sec) when the pointer icon ( > ) is next a selection will save it as the Dive Main* and revert to the Set Menu.
*Ensure that the selection to be saved reflects information you want to see on the Dive Main, it cannot be changed during the
dive (only while on the surface using this menu).
SET P (Preview) Menu, information includes (Fig. 35):
> Graphics SEt P and MENU.
Using this menu, you can chose up to 4 items (Set Points that have been entered) for display on a Preview screen that can be ac-
cessed from the Surface Main Menu (see page 15).
Up to 4 items can be selected from the following menu list.
> FO2_GAS 1 SET .
> FO2_GAS 2 SET .
> FO2_GAS 3 SET .
> FO2_GAS 4 SET .
> PO2 AL SET .
> DEPTH AL SET .
> EDT AL SET .
> TURN AL SET .
> END AL SET .
> DEEP STOP SET .
> SAFETY STOP SET .
> GLO DUR SET .
> MAX OP DEPTH .
• A (< 2 sec) to step forward (down) through selections.
• M (< 2 sec) to step back (up) through selections.
• S (< 2 sec) when the pointer icon ( > ) is next a selection will toggle* it between solid and flashing.
*Once 4 items are flashing, another item cannot be toggled to flash until one of the flashing items is toggled to solid.
When satisfied that those items flashing (up to 4) are what you want for the Preview screen, press S (2 sec) to display all
items flashing (Fig. 36), then press S (< 2 sec) to revert to the Preview screen with all items solid.
Fig. 33 - SET S MENU
(stepping through)
Fig. 34 - SET D MENU
(stepping through)
Fig. 35 - SET P MENU
(stepping through)
Fig. 36 - SET P MENU
(preview of selections)