Operation Manual

36
VT 4.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5213-r02 (9/6/11)
HISTORY, shared with NORM (see page 14).
VT 4.0 ID, same as NORM (see page 14).
BATT/TMT STATUS, same as NORM (see page 14).
DIVE PREVIEW
This feature provides quick access to a screen that displays up to 4 settings that can be pre selected* using the Set P Menu.
Preview, information includes (Fig. 85):
> Graphics GAU and PREV.
> Selections* with Set Points entered using that menu.
• S (< 2 sec) to revert to the Main Menu.
SET GROUPS
Information that follows describes the selections contained in the GAUG Set Groups (A, U, T, S, D, P) that are accessed from the
Set Menu.
Main Menu >> Set Menu >> Set Group Menu >> Set Selection.
SET A (ALARMS), shared with NORM (see page 16).
SET U (UTILITIES), shared with NORM (see page 16).
SET T (TIME/DATE), shared with NORM (see page 17).
SET S (Shortcut) Menu, information includes (Fig. 86):
> Graphics SEt S and MENU.
Selections include:
> LOG MENU.
> MY INFO (default Shortcut until another item is selected)
> SET HEADING.
> SET TIME.
One item can be selected from the list. That item (referred to as a Shortcut) can then be accessed directly by pressing M (2 sec) while viewing the
Surface Main.
• A (< 2 sec) to step forward (down) through selections.
• M (< 2 sec) to step back (up) through selections.
• S (< 2 sec) when the pointer icon ( > ) is next a selection will save it as the Shortcut and revert to the Set Menu.
• S (2 sec) to revert to Main Menu.
SET D (Dive Main) Menu, information includes (Fig. 87):
> Graphics SEt d and MENU.
The default screen for dives displays Current Depth, Run Timer, Pressure, and ATR (air time remaining). Max Depth is displayed on an Alternate
screen. Set D allows it to be added to the Main (moving it from the Alternate).
Selections include:
> USE DEFAULT >> no change to the display.
> ADD MAX D >> also reduces the size of NDC digits .
• A (< 2 sec) to step forward (down) through selections.
• M (< 2 sec) to step back (up) through selections.
• S (< 2 sec) when the pointer icon ( > ) is next to a selection will save* it as the Dive Main and revert to the Set Menu.
• S (2 sec) to revert to Main Menu.
*Ensure that the selection to be saved reflects information you want to see on the Dive Main, it cannot be changed during the dive (only
while on the surface using this menu).
Fig. 85 - GAUG DIVE
PREVIEW
*If no selections have been
made yet, the center of the
screen will be blank.
Fig. 86 - GAUG SET S
Fig. 87 - GAUG SET D