Operation Manual

37
VT 4.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5213-r02 (9/6/11)
SET P (Preview) Menu, information includes (Fig. 88):
> Graphics SEt P and MENU.
Using this menu, you can chose up to 4 items (Set Points that have been entered) for display on a Preview screen that can be accessed from the
Surface Main Menu.
Selections include:
> DEPTH AL SET .
> EDT AL SET .
> TURN AL SET .
> END AL SET .
> GLO DUR SET .
> MAX OP DEPTH .
• A (< 2 sec) to step forward through Menu selections.
• M (< 2 sec) to step back through Menu selections.
• S (< 2 sec) when the pointer icon ( > ) is next a selection will toggle* it between solid and flashing.
*Once 4 items are flashing, another item cannot be toggled to flash until one of the flashing items is toggled to solid.
When satisfied that those items flashing (up to 4) are what you want for the Preview screen, press S (2 sec) to display all items
flashing (Fig. 89), then press S (< 2 sec) to revert to the Preview screen with all items solid.
Fig. 88 - SET P
(stepping through)
Fig. 89 - SET P MENU
(preview of selections)
Upon descent to 5 FT (1.5 M) for 5 seconds,
operation will enter GAUG Dive Mode.