Operation Manual

FEET

ATR

PSI

Depth Displays

During a dive, the Current Depth display (Fig. 6a), indicates Depths from 0 to 399 feet

(120 meters) in 1 foot (.1 meter) increments.

By pressing the Front (Advance) button, the Maximum Depth reached during that dive

will be displayed (Fig. 6b).

During a Decompression Dive, the required Ceiling Stop Depth is displayed in the Max

Depth position. Maximum Depth can be viewed by pressing the Front (Advance) button.

Time and Date Displays

Time displays are shown in hour:minute format (i.e., 1:16 represents 1 hour and 16

minutes, not 116 minutes!). The colon that separates hours and minutes blinks once per

second when the display is indicating real time (e.g., Elapsed Dive Time), and is solid (non-

blinking) when times are calculated projections (e.g., Time to Fly).

The Main Time display has the largest digits of the display (Fig.

6c) A second time display (Fig. 6d) is located above it. Both

displays are identified by clock icons.

Date is displayed only to identify dive data while it is viewed in

the Log Mode. When Units of Measure are set for 'Imperial', the

Month appears to the left of Day. When set for Metric, the

Month appears to the right of Day.

Fig. 6 - Cylinder Pressure

and Depth Displays