Operation Manual

Display Module Battery Hatch Removal

• Locate the Battery Compartment on the back of the module.

• While applying steady inward pressure on the clear Battery

Hatch, rotate the Hatch Ring clockwise 10 degrees by

pressing on the upper/right arm of the Ring with a small

blade screwdriver (Fig. 106A).

NOTE: If available, an adjustable face spanner tool or

a pair of pointed pliers can be used instead of the

screwdriver by inserting the tips of the tool in the

small holes in the Ring (Fig. 106B).

• Lift the Hatch Ring up and away from the Housing.

• Remove the clear Battery Hatch.

Battery Removal

• Remove the Retaining Bar located across the lower portion of

the Battery (Fig. 107a).

• Remove the Hatch O-ring. DO NOT use tools

• Using care not to damage the Battery Contacts (Fig. 107 b/

c), slide the Battery up and out of the right side of the Battery

Compartment.

NOTE: DO NOT allow a metal object to short circuit

the top of the Battery which is positive (+) to the

negative ( - ) contact of the Battery Compartment.

Fig. 106A - Display Module

Battery Hatch Removal

Fig. 106B - Alternate

Battery Hatch Removal

Fig. 107 - Display Module

Battery Hatch Removal