OWNER’S MANUAL For the following models: BHP0106 Series BHV0100 Series RHP0109 Series RHV0103 Series CAUTION: Carefully Read Instructions and Procedures for Safe Operation.
PARTS LIST QTY: 1 QTY: 2 QTY: 1 Bottom Board Right and Left Side Panel Hamper Lid QTY: 2 QTY: 8 QTY: 8 Back and Front Panel Threaded Post Cam Insert QTY: 1 QTY: 4 QTY: 2 1 Interior Bag with 2 Metal Rod Screw for Hinges Screw for Piano Hinge
1) Insert 4 Cam Inserts into the four corners of the Right Side Panel (the one with a Piano Hinge). Also insert 4 Cam Inserts into the four corners of the Left Side Panel. 2) Insert 4 Threaded Posts into the four corner of the Front Panel. Also insert 4 Threaded Posts into the four corners of the Back Panel.
3) Align Right and Left Side Panels to the Back Panel and connect them together. Use a Slotted screwdriver or Phillips screwdriver to tighten the Cam Inserts. Slide the Bottom Board as shown below. 4) Align Front Panel (Flat Style shown below or Bowed Front Style) to the Side Panels and connect them together using a Slotted screwdriver or Phillips screwdriver.
) Align Hamper Lid to the Back Panel using the four Screws for Hinges provided with a screwdriver to tighten. Connect the Piano Hinge to the Hamper Lid (see diagram) using the two Screws for Piano Hinge with a screwdriver. Insert Interior Bag into the hamper (see diagram). Close the lid and you are done. Congratulations on your new hamper! CAUTION: DO NOT apply pressure to the hinges by opening the lid past its normal stopping point which is at 90 degrees.